Viscoelastic anti-corrosion tape can be wrapped at room temperature, and the construction conditions are not restricted. The production process of cold-wrapped anti-corrosion tape is also simple and the cost is relatively low. Let's take a look at the wrapping method of anti-corrosion tape.
　　1. Before wrapping the viscoelastic anti-corrosion tape, it needs to be unrolled. The temperature of the tape during unrolling should be above 5 degrees Celsius, which is more suitable to ensure the construction quality of the tape.
　　2. During the wrapping process, if a weld is encountered, a narrower tape can be used for wrapping first to cover the weld and then press it.
　　3. To ensure that the wrapping of the viscoelastic anti-corrosion tape meets the construction requirements, mechanical wrapping can be used. If manual wrapping is used, it will not meet the requirements of mechanical wrapping.
　　After reading the above introduction, I wonder if you have learned it? Viscoelastic anti-corrosion tape should be constructed in a better environment to meet the quality requirements of the tape.